Have you ever wondered what goes on inside a Sat-Lok fitting? At the Annapolis Boat Show, I had the privilege of seeing just how their system works with my own eyes (instead of imagining it based off of technical drawings).
Sta-Lok milled away a section of one of their fittings to allow show-goers the ability to lay their eyes on what goes on inside of the terminators.
Sta-Lok is a HyMod type fitting where the strands of the wire are actually spread out over a cone and then pinched at the bottom. The outer strands wrap over the cone while the core strands pass through the cone. As the wire is pulled out of the fitting, the cone crushes down on the core wires, holding them in place. The whole system is very simple and very effective, and this model just makes everything easier to mentally grasp.
