Boating With A Baby: What Should I Bring On A Yacht Trip

Bringing your baby with you on a boat trip can be a challenge, but there are also rewards for doing it properly. Safety should be your top priority when traveling with your baby, and it applies not just to boat and sea transportation, but all modes of transportation as well. 

If you plan on going on a yacht trip with your baby, there are important things to bring to ensure a safe and worry-free trip with your baby. For your peace of mind, the parenting experts recommend bringing one of the best baby monitors with you, so you can keep track of your baby even when you're not around, especially when it's a big yacht. Aside from this, there are some essential travel tips here for you and your baby as you read along.

Bring a Life Jacket

Always have a life jacket ready for your baby. Do not rely on the available life jackets inside that yacht, as they are most probably designed for adult passengers. When choosing a life jacket for your baby, make sure that it is appropriate for infants. Also, make sure that the life jacket fits snugly to your baby by wearing it on them before purchasing. Check the strap tightness and overall fit by lifting your child’s two arms. The life jacket shouldn’t hit your child’s chin or ears, nor should it be hard to raise their arms. Remember to do a practice fitting on your baby before the travel commences to reinforce your memory on how to wear a life jacket on your baby.

Bring Insulating Clothes

Boat travel can be quite breezy, and there are possibilities of sudden gusts of wind. Weather can be unpredictable out in the open sea and temperatures can dip dangerously low for your baby. To avoid the risk of hypothermia, you should ensure to bring a blanket, a baby jacket, or a dry towel with you. If you notice that the baby has goosebumps or seems cold and shivering, immediately wrap them tightly with a blanket or dry towel. As a preventive measure, change your baby’s clothes into something warmer, especially during the late afternoon, if your travel requires an overnight stay in the yacht.

Bring Lots of Baby Food/Milk

Always ensure that you have more than enough supply of baby food or milk during your sea travel. There is a possibility of a prolonged stay due to travel delays and your baby might be hungrier than usual while adjusting to the travel environment. Even though it was not included here, you also have to bring lots of water to keep your child hydrated, as temperatures can fluctuate dramatically in different parts of the day. As such, babies may sweat or pee a lot more than usual, so make sure to replenish the water in their bodies.

Bring Lots of Baby Clothes and Supplies

Aside from baby supplies for storing food and milk, bring more than enough diapers, and a change of clothes in your preparations. Unless there is a suitable space inside the yacht for your baby, it would be wise to bring protective clothing for sun exposure, such as long-sleeved footies, rompers and onesies, baby rash guards, and baby sun hats. Also, bring hypoallergenic sunscreen lotion for added protection if you wish to venture outside the yacht and see the beautiful sceneries with your baby.

Sea travel with your child doesn’t need to be difficult and stressful. Preparation, caution, and attention to your child are the keys to having a safe and enjoyable travel experience, even if your child is with you. Having happy memories with your baby and enjoying the entire trip are just a few of the priceless rewards for a job well done. 

Sea travel with your child doesn’t need to be difficult and stressful. Preparation, caution, and attention to your child are the keys to having a safe and enjoyable travel experience, even if your child is with you. Having happy memories with your baby and enjoying the entire trip are just a few of the priceless rewards for a job well done. 

What are the Animals that You Can Hunt?

Hunting season is one that is loved and revered by many Americans and within this season everything is on the cards. If you can hunt it, you can eat it. I will say now if you’re planning on going out and hunting, then do it for the right reasons. Use every bit of the animal you kill and don’t go out to kill just for the sake of it.

Hunting can save you a lot of money if you can store all the animals you harvest as you won’t need to go to the supermarket and spend a lot of money on pre-wrapped bits of meat.

Let’s take a look at some of the best animals for you during the hunting season.

Cervids

This is the correct name of the deer family and when we talk about cervids we are talking about elk, moose, caribou, and of course deer itself. These guys are a large family of animals and will take some skill to hunt, but will also feed your family for weeks! You can always tell a mature male as they will have complex, large antlers coming from the top of their heads. Through the growing stage of their lives, these antlers will fall off and re-grow every year becoming more complex as time goes by.

Females don’t tend to have antlers so it’s usually pretty easy to tell the difference before taking your shot. When it comes to these guys you have to have the right equipment to be able to take them down, there’s no point going hunting with a small rifle and expect to bring home a prized male Elk. You never want to be caught out, which is why doing your research on what you’ll need for an individual animal is essential to a successful hunting trip. In these situations, it’s best to get every aspect of your gear list ready so you can be fully prepared when you leave for your trip. Having consumer reviews will help you choose the best gear suited to you.

Wild Boar

These guys are super strong and hardy animals, hunting them will be no easy feat. Anything but a kill shot will leave you in danger of being charged at, and with their tusks could prove a nasty experience. There are plenty of places in the US where there is a huge amount of wild boars so there are no limits to the amount you are allowed to kill.

Cougar

When it comes to hunting a big cat, I would first think seriously about if it’s a worthwhile cause. Killing for trophies is no longer a thing that’s as widely accepted so unless you’re going to eat it you better not kill it. Having said that, you’ll have to catch them first! This will prove to be an elusive beast that will have you stalking it for days on end in some cases. Their whole purpose is to be sneaky, it’s how they hunt and how they live, so trying to out sneaks a cougar is going to prove difficult. Another thing to note is that if you don’t know the area, I wouldn’t bother hunting cougars at all, not unless you enlist the help of someone that knows what they’re doing.

Bison

Being the largest land-dwelling animal in North America, these beasts were once hunted to near extinction, but now they are back to a flourishing population and back on the cards when it comes to hunting. These guys are nearly 2000lbs and have a sporadic temper, combine this with the fact they can run at 35mph you best either have a decent hiding spot or very good aim.

Turkeys

Not the same as other game birds, oh no. This requires you to learn another skill, the turkey call! You’ll need to learn how to woo a turkey and get it to like you, this means it will come closer to your beckoning calls and you will then be able to strike. Thanksgiving dinner will taste so much better this year.

Hunting is a privilege and we should treat it with respect, if we overhunt animals then they won’t be around for us to hunt ever again. This is why certain hunting bans get put into place and it’s why we should respect them. We should also be hunting for the right reasons, to feed our families.

If you’re in the early days of your hunting career then make sure you get the right equipment for the right hunt, each animal will require something slightly different and never forget the orange rule! All hunters must wear bright orange when hunting to avoid becoming a target themselves, it's for your own safety!

Deck Stepped vs Keel Stepped

Deck Stepped vs Keel Stepped Mast

Sailboat rigs can broadly be separated into two main groups: Keel Stepped and Deck Stepped; each with it’s own particular attributes and drawbacks.

This distinction refers to the location of the mast step, or where the base of the mast is located. With Keel Stepped, the mast stands on the keel at the bottom of the hull, while Deck Stepped means that the mast stands on the top of the deck.

Deck Stepped

The most obvious difference between the two from a livability standpoint is the presence or absence of a mast inside the cabin. For the Keel Stepped mast to reach the keel, there needs to be a giant hole in the deck where the mast slips through to then pierce the cabin area and finally rest on the keel. This means that no matter how “open and airy” they make the cabin, there will always be a spar stuck right in the middle! Deck Stepped allows for the mast to stay outside and therefore the cabin can exist completely unobstructed without the presence of the spar.

Open salon on a Deck Stepped yacht

Mast in the middle of the salon on a Keel Stepped yacht

This is as far as cosmetics go concerning the mast step position, from here on everything gets technical!

On either a Deck Stepped or Keel Stepped yacht, the mast height will be the same, which means that the length of the spar inside the cabin will make up the difference. This means that a keel stepped mast will naturally have a longer total spar length and this spar will be supported at one additional point than a Deck Stepped mast.

This becomes important in mast stability, as each point of support to the spar makes the spar stiffer. Try taking an uncooked spaghetti noodle and push on it only at the ends; the noodle will bend easily. Now have someone pinch the noodle in the middle and push the same as before, it will not bend nearly as much. If the noodle is pinched in two positions, it becomes even stiffer, and so on and so on.

Each point of contact to the spar stiffens the whole structure. Each point of contact with the spar exists in the form of points where stays attach to the mast, as well as the mast step, and in the case of a keel stepped mast: the mast/deck interface.

In rigging, each span between a contact point is known as a panel, and typically, the shorter the panel, the stiffer the spar will be.

Naturally, if you have two almost identical yachts with two sets of spreaders, one being Keel Stepped and the other being Deck Stepped; the number of contact points would differ by one.

Both yachts will have contact points at the masthead, at the top spreaders, at the lower spreaders, and at the mast step, but the Keel Stepped yacht will also have a contact point at the mast/deck interface.

In other words, on a two spreader rig, there are 4 points of contact for the Deck Stepped and 5 points of contact for the Keel Stepped.

It seems simple enough, to make them identical, all you need to do is add a set of spreaders to the Deck Stepped version and you will have the same number of contact points, thus the same stiffness in the spar.

Keel Stepped

In theory, yes, but it isn’t identical in practice. See, the mast/deck interface is non mobile. There is no wiggle room between the two as mast wedges are actually driven in between the two to center the mast and hold everything incredibly still. The first spreader position, by contrast is supported by stays which are both adjustable and also dynamic (they move around as the mast moves). In other words, the number of contact points is identical but the type of contact points is not, therefore they are not the same.

You might be wondering why both styles exist. Obviously one is better than the other and therefore should be the only style produced! This is true, but just as “Beauty is in the eye of the beholder”, so is the “perfect sailboat rig”.

Stiffness and stability of the spar is the primary goal of standing rigging, but the secondary goal of standing rigging is sail trim. Yes, running rigging has the primary goal of sail trim and that is what you adjust if you want to trim your sails, but standing rigging is just as important (though not as easy to adjust). The bend of the mast and headstay tension play huge roles in sail trim. If the mast is very straight, you will have more lee helm while if the mast is bent aft, you will have more weather helm. Just the same, a slack headstay will give a more powerful luff to the headsail and more power off the wind while a tighter headstay will straighten out the luff and give better pointing ability and windward performance.

Yes, I said performance and that is where the difference resides. For a slow and steady cruising yacht, a stout spar is the bees knees. It’s stiff and strong and will hold up to any condition. This is why Keel Stepped yachts are preferred for cruising! This “Set it and Forget it” mentality is not shared by those in the racing community.

Deck Stepped yachts have mast that are more bendy and flexible. This means that the mast is also more easily adjustable which means that optimum performance can always be extracted by making small adjustments to the standing rigging. Going upwind, the backstay, runners, and check stays can be have tension added to them to tighten the stays and pull the mast aft. This will both rake the mast aft giving it weather helm as well as tension the headstay for added pointing ability. By contrast, when running off the wind, the aft stays can be slackened which will let the mast swing forward and ease the headstay, giving the yacht lee helm and filling the powerful headsail even further!

Here the bendy mast actually pumped forward and is bent forward and at very high risk of breaking

In racing, Deck Stepped is king, while in cruising, Keel Stepped is strong. Why the difference? Wouldn’t it be nice to get somewhere faster and have more time to enjoy the destination? That would be a cruisers dream, but it would also be their nightmare.

Racing differs from cruising in many aspects, but one major aspect is the availability of help. In a race, there are many people sailing along side you, as well as entire teams that are there to support you in a time of need or crisis. This means that if something breaks, it’s not the end of the world because a professional will be along shortly to repair it for you. A cruiser is all alone!

If something breaks on a cruising yacht anchored in a remote deserted island, no one is going to come to their aid. I can’t say that cruisers see storms while racers do not because almost all of the catastrophic sailing events occurred to race yachts during a race! That said, a cruiser will see storms with no outside help. If something breaks, there is no race committee to send help for them. They must fix their yacht themselves with what they have left.

Now we are going to get into Jury Rigging and why Keel Stepped is superior to Deck Stepped for cruising.

When all Hell loose and the mast comes crashing down, one of two things is going to occur. Either the mast will fall over at the deck or the mast will snap at the first spreader. Most often, the mast will buckle and snap at the first spreader as this results from a cap shroud failure. The cap shrouds are under the most stress and are usually the first stay to break during heavy weather. When they break, the top of the mast becomes unsupported and the lowers become the new “strongest point” on the mast. Since the lower panel is supported by the lower shrouds, all that will be left of your spar will be the lower panel during a cap shroud failure as the top will come crashing down.

If all the stays fail on the mast, then the mast will fall over! On a Deck Stepped mast, this means that the mast will just fall over since the mast simply stands on the deck totally reliant on the rigging. A Keel Stepped Mast, by contrast, always has one point of contact above the mast step: the mast/deck interface, and therefore the mast can still stand without the standing rigging (but not in a storm, in a storm everything is bad), but in a storm, the mast will simply break and fall over to side at the deck leaving you a massive hole in your deck where the mast used to pass through. In very extreme conditions with slack rigging on a Deck Stepped yacht, the combination of a flexing hull, and severe pounding of the spar (imagine a giant wave crashing into your sails) a Deck Stepped mast can jump off the step and fall over just the same.

Both of these cases leave you with broken rigging and a problem to resolve. If you are racing, then the race officials will send help and all you need to do is wait, but if you are cruising, you are alone and no one is going to come for you! You need to fix it yourself and sail to your next port for repairs, and that rigging is called Jury Rigging.

The most common mast breaking scenario is where the cap shrouds fail and the mast buckles at the first spreader. Now your mast is much shorter, but you still have a mast to rig your sails to and to attempt to sail back to a port (or at least close enough to land to call for help).

Now, imagine that your mast is going to snap off at the first spreader! Which remaining mast length would you wish to have?

The single spreader rig has 1/2 of its mast left in the lower panel. The double spreader rig has 1/3 of its mast left in the lower panel, while the triple spreader rig has 1/4 of its mast left in the lower panel.

This is all you have to hold your sails up in the air to sail you back to shore, naturally, you would want the taller mast which means you would want to have the spar with a single spreader.

Since the points of contact introduce stiffness to the spar, another way of looking at it is having more points of contact means you can have a less strong mast as the strength is coming from the rigging instead of the spar itself. A triple spreader rig will be installed on a very limber spar, while a single spreader rig will be installed on a very stiff spar. You can’t just take off a set of spreaders before you go cruising to prepare for a misadventure. Likewise, a Deck Stepped mast will always be more limber and therefore will need to be even thicker walled to make it stiff enough to compare to the stiffness of a Keel Stepped mast.

They all break at the first spreader during a cap shroud failure. Having a longer lower panel means that now you have a taller mast to work with.

Keel or Deck Stepped, during a cap shroud failure, this will be your end result. The difference comes in the length of the lower panel between these two. If a yacht designer wants 3 points of contact with the spar, this will mean a single spreader Keel Stepped mast or a double spreader Deck Stepped mast. This also means that in a catastrophic failure situation, you have 1/2 your mast left or 1/3 of your mast left.

Let’s take things one step further in a horrible direction and imagine that the entire rig falls down. You now have no mast and (if your yacht is bigger than 30 feet) no way of raising your mast back up as the spar is just too heavy to manage on the deck of the boat. What do you do?

If you have a Deck Stepped yacht, you now have a sealed up power boat with no holes in it. If you have a Keel Stepped yacht, then you now have a huge hole in your deck. This is why large flow manual bilge pumps are important to have as well! On a Deck Stepped yacht, your only option to Jury Rig a spar will be to try and secure something to the step, but this can be a bit tricky. There really is no easy way to hold the bottom of your spar in place and it can slip out on you. A Keel Stepped yacht, on the other hand, has that nifty hole in the deck which will help hold things in place for you. Many people Jury Rig by slipping the boom into the hole and inside the remnant of the mast. They then rig up the short spar with any sails they have left and make their way towards a port for repairs. Others have used spinnaker poles for this same purpose.

Jury Rigging is literally “fixing it enough with what you have on hand”. You can see that there is no standard for what goes where or any rules about aspect ratio or sail design. After the catastrophe, you need to piece together what you can with what you have left. This is why it is important to try and salvage your broken spar and not just cut it loose and let it sink to the bottom. Out in the ocean, there are no more supplies so you need to keep everything that you have because you might need it later!

Having a Keel Stepped mast means that you now have a hole to help hold your Jury Rigged spar in, as well as potentially a longer lower panel since you won’t need as many spreaders.

It is not a good idea to worry about what you would do should your rig fall down because you will never be able to enjoy sailing. Every puff of wind will bring with it a gale of anxiety as you anxiously await that awful sound of metal buckling! Instead, plan ahead of time (before you buy your yacht) for what may come one day. Plan for the mast to fall and figure out what you would do if your mast breaks at the deck or your mast breaks at the first spreader. Have a plan and know what you would do, and then forget about worrying because you are prepared in the rare event that your rigging fails (because you read this blog and therefore know how to properly inspect your rigging and repair problem areas before the situation turns catastrophic).

If you are interested in pure racing performance and will stay close to shore, then you don’t need to worry as much about having something that will get you home (because you are never far from home). Enjoy your Deck Stepped Racing Machine!

If you are going to be cruising far and wide, then maybe consider something that will be strong enough to not break in the first place and something with low loads. If you notice, all the boats that I was able to find pictures of with broken masts jury rigged are racing yachts. This is for two reasons: in racing, you push the yacht to its breaking point, literally. Second, they all had high aspect ratio rigs which are also high stress rigs. One component failure and the whole thing came crashing down. When they jury rigged, they produced something that is low aspect ratio because the loads and stresses are much lower and their simple jury rig was able to support it. If you start off with a low aspect ratio rig on a strong Keel Stepped mast, you will have very little to worry about while you are cruising!

There really is no perfect rig, it’s just a matter of choosing one that works for what you need. If you are racing, a Deck Stepped mast will give you more adjustability and that will give you a winning edge against your competitors. If you had a Keel Stepped mast with a single spreader, you would become very frustrated as you would lose all the time!

On the other hand, if you are cruising, constantly trimming a deck stepped mast is a lot of work! There are plenty of other things to do while you are cruising, like fish or read, or sleep. Constantly trimming the mast will become a chore, especially on a long passage in good weather. It will become unnecessary complexity that will get in the way of cruising. We have been cruising full time for three years now (check out our adventures on YouTube) and we have a heavy cutter with a Keel Stepped mast and a single spreader. Having a cutter rig does give us an extra point of contact with the spar giving it the stiffness of having a second set of spreaders without the complexity. Our mast has the Mast Head, Inner Stays, Lower Stays, Mast/Deck, and Mast Step for points of contact. Should the cap shrouds fail, the inner stays might hold the mast up at 3/4 of the original mast, if not, we will be at 1/2 mast. We enjoy our passages from one place to another and feel safe in our heavy old boat. We do have some features that seem “high performance” such as our synthetic standing rigging and backstay adjuster.

While performance yachts have Dyneema rigging like ours, we did not do it for performance, but actually for simplicity. I added the back stay adjuster because it was easy to include in the new rigging. The backstay adjuster allows us to tighten the headstay for going upwind and ease the headstay for going downwind. How often do I adjust it? About once a month, if needed.

In cruising, you are either going upwind or downwind for a long time. You are not racing around a buoy where you have an unwind leg followed by a downwind leg in the same day (and in racing, many times during that same day). When we sailed through The Bahamas, we were going upwind, so I tightened the backstay once and left it that way until we set sail to cross the Atlantic on a downwind route which took months to complete (with lovely stopovers in Bermuda and the Azores). That whole time, the backstay remained eased as we were sailing downwind. In all honesty, the backstay has remained eased from 2018 until now in 2020, because we always choose downwind destinations, or wait for the wind to shift to make our destination downwind. This is what I mean when I say that a high performance rig is not necessary if you are planning to go cruising. The pace of sailing is so much calmer that a flimsy (and very adjustable) Deck Stepped mast is not necessary.

Protecting Wood on Your Yacht

Wood is a beautiful material that gives character, class, and beauty to your yacht; but the marine environment is anything but forgiving! Wood on a yacht is prone to rotting as it is exposed to fierce sun, moisture, salt, and grime.

Linseed Oil will help protect your wood from rot and keep it looking beautiful!